72 Cavity PET Preform Mold
Mu ne daya daga cikin dogara kamfanoni a cikin wannan filin, miƙa PET preform molds tare da ci-gaba PET preform mold zane fasahar.
1. Abu
Abun al'ada 632: Mafi kyau fiye da FS136 tare da mafi girman nickel da abun ciki na chromium.
Tauri, juriyar tsatsa, da tasirin fari an inganta a fili.
A mold tushe da aka yi da HRC 38 ~ 40 bakin karfe ko P20 (pre-taurare).
2. Tsararren ƙira na nau'in SelfLock
Kafin rufe mold ɗin, an kulle kabu ɗin rabuwa a wuri ta hanyar zobe na kulle don rage lalacewa ta layin rabuwa a gefen rami da gefen cibiya, ta haka za a tsawaita rayuwar layin rabuwa.
3. Tsarin sanyaya
Jigon yana ɗaukar maɓuɓɓugar ruwa ko tsarin sanyi mai karkace.
Ana amfani da hanyoyin ruwa mai karkace don niƙa a waje da rami, haɓaka haɓakar sake zagayowar da rage lokacin tsaftacewa.
An haƙa wuyan wuyan tare da tashoshi masu kwantar da hankali.
Kowane farantin an ƙera shi daban-daban tare da tashoshi masu kewayawa.
Ana amfani da ingantacciyar shimfidar sanyaya don tabbatar da sauri da ingantaccen musayar zafi tsakanin karfe da ruwa kuma yana tallafawa lokutan zagayowar sauri don adana farashin makamashi.
48-kogon iska-hatimin PET preform mold
1. Professionalwararru da fasaha gwaninta a preform mold cavities jere daga 1 zuwa 96 cavities.
2. Ƙimar da aka yi amfani da ita yana amfani da software na CAD don tsara siffar preform bisa ga kwalban don tabbatar da ingancin gyare-gyare na kwalban.
3. The thread bude abu na preform mold da aka shigo da nitrided karfe, kerarre bisa ga kasa da kasa matsayin, tare da high taurin, kowane zaren ne ventilated, kuma yana da dogon sabis rayuwa ba tare da nakasawa.
4. Preform mold core da rami an yi su da karfe mai jurewa, wanda yake dawwama.
5. A preform mold rungumi dabi'ar ci-gaba zafi mai gudu zane, sabõda haka, kowane rami za a iya da kansa zafin jiki sarrafa, mai tsanani, da kuma yawan zafin jiki ne uniform.
6. Yanke-free gate preform mold, ceton aiki da albarkatun kasa.
7. Ana sarrafa zazzabi na bututun mai zafi mai zafi daban.(Don magance matsalar fari da zanen waya a ƙasa yayin aikin samarwa).
8. Allura-bawul kai-kulle preform mold: kowane core, rami, m biyu kulle kai, daidaitacce eccentricity, rage eccentricity, tabbatar da samfurin concentricity, high daidaici.Tsarin yana da tsawon rayuwar sabis.
9. Taimako samfurin da zane-zane, samar da sabon haɓaka samfurin, sabis na tsayawa ɗaya don sarrafa gyare-gyaren allura!
48-kogon iska-hatimin PET preform mold
1. Siffar Mold:
1. Mun ƙware a cikin samar da allura bawul molds, wanda ba ya bukatar manual yankan.
2. Yin amfani da ingantaccen tsarin mai gudu mai zafi yana tabbatar da cewa ƙimar AA na samfurin yana cikin ƙananan matakin.
3. M sanyaya ruwa tashar zane karfafa sanyaya sakamako na mold da yadda ya kamata shortens da allura gyare-gyaren sake zagayowar.
2. Zaɓin kayan aiki:
1. Babban sassa na mold an yi su ne daga shigo da kayan S136 (Sweden-Sabak).
2. Kayan tushe na mold yana ɗaukar kayan P20 da aka shigo da shi da kuma maganin electroplating, wanda ke inganta juriya na lalata da kuma tsawaita rayuwar sabis na mold.
3. Ana sarrafa yanayin zafi na sassan a cikin tanderun da aka shigo da shi daga Jamus, kuma taurin sassan yana da tabbacin kasancewa a HRC45 ° -48 °.
4. Nagartaccen kayan aiki:
Kamfanin ya gabatar da kayan aikin injin da yawa da aka shigo da su daga Amurka da Japan, irin su cibiyoyi, CNC lathes, EDM, da dai sauransu, don tabbatar da daidaiton mashin ɗin na sassan da kuma sanya sassan suna da kyakkyawar musanya., Kuskuren nauyi ya kasance ƙasa da 0.3g, ana iya samar da ƙwayoyin 2-5 a cikin minti ɗaya, kuma rayuwar sabis na iya kaiwa sau miliyan 2 mold.
24 cavity preform mold
A sabon preform mold tsarin da kansa bincike da kuma ci gaba iya gaba daya kawar da mafi yawan disadvantages na baya kyawon tsayuwa, kuma zai iya cimma high-daidaici concentricity da kuma tsawon rai na mold, kuma za a iya gudanar da wani standardization na daban-daban sassa na mold da taro samar.Kayan aikin mu suna tabbatar da cewa bambancin kauri na bangon bututun bai wuce 0.05mm ba, kuma kuskuren nauyi bai wuce 0.3g ba.2-5 molds za a iya samar a cikin minti daya, da kuma sabis rayuwa iya isa 2 miliyan mold sau.Tsarin yana da matsakaicin cavities 96.
