24 Cavity PET Preform Mold

Takaitaccen Bayani:

ƙwararriyar ƙirar PET preform mold

Kawai mayar da hankali kan preform molds!High quality, high-inganci Multi-rago preform molds.PET preform mold nadi 2-14/16/24/32/48/64/72/96 rami da jar mold, abin dogara PET preform mold maroki.Sabis na musamman na kyauta, 3D preform samfurin ƙira, ƙwararrun masana'anta, gamsuwa 100%.

Sunwin mold yana samar da fiye da 100 Multi-cavity PET preform molds kowace shekara, jere daga 4 zuwa 96 cavities.

Shekarun haɓaka fasaha da gado na Sunwinmold sun sanya ƙirar ƙirar ƙirar Sunwinmold mafi ɗorewa, sauƙin kiyayewa, kuma mafi inganci a samarwa.Sunwinmold zai yi muku hidima da zuciya ɗaya kuma yana sa ran ziyarar ku.


Cikakken Bayani

Tags samfurin

48-caviy-pet-prefrom-mould3-(3)

48-Cavity Pin Valve PET Preform Mold

1. Mai zafi mai zafi yana ɗaukar tsarin kula da PID, wanda ke nuna ta atomatik gyare-gyare da ayyukan kariya ta atomatik, wanda zai iya tsawaita rayuwar sabis na na'urar dumama wutar lantarki;

- Ana sarrafa zafin jiki a cikin 1 ° C don tabbatar da cewa ba a ƙone kayan da aka ƙone ba a cikin mai gudu mai zafi, kuma ƙimar samfurin da aka gama zai iya kaiwa fiye da 99%;

-Sabuwar ƙirar bututun ƙarfe yana sa ƙirar ta fi sauƙi don kiyayewa, ɓangaren ɓarna na bututun ƙarfe, ɓangaren dumama, ɓangaren insulation na zafi, da thermocouple ana iya maye gurbinsu cikin sauƙi ba tare da tarwatsa ƙirar ba, wanda ke da fa'ida don rage raguwar lokaci da adana farashin kulawa. .

2. Tsarin sanyaya

-Tashar ruwan sanyi mai karkace rami yana sa tasirin sanyaya ya fi karfi.

-Tashar ruwa mai sanyaya a kan tashar da aka zazzage da mai sikelin yana haɓaka tasirin sanyaya.

-Mai kyau da aka ƙera farantin rarraba tsakiyar tsakiya, ana iya shigar da ruwa mai sanyaya a ko'ina cikin kowane rami, kuma duk preforms ana iya sanyaya su daidai da sauri.

3. Mai zafi mai zafi

- Mai zafi mai zafi tare da kyakkyawan aikin ma'auni yana tabbatar da kwarara da matsa lamba na PET a cikin duk cavities suna da daidaituwa.

-PET narkewa tashoshi yana rage girman ƙarfi da asarar IV kuma yana ba da damar narke PET ta gudana daidai da kowane rami.

- Mafi kyawun rarraba zafi yana kiyaye abun ciki na acetaldehyde (AA) a cikin duk cavities barga.abu

Abun al'ada 632: Mafi kyau fiye da FS136 tare da mafi girman nickel da abun ciki na chromium.

Tauri, juriyar tsatsa, da tasirin fari an inganta a fili.

A mold tushe da aka yi da HRC 38 ~ 40 bakin karfe ko P20 (pre-taurare).

2. Tsararren ƙira na nau'in SelfLock

Kafin rufe mold ɗin, an kulle kabu ɗin rabuwa a wuri ta hanyar zobe na kulle don rage lalacewa ta layin rabuwa a gefen rami da gefen cibiya, ta haka za a tsawaita rayuwar layin rabuwa.

Gabatarwa zuwa Manufacturing Mold

Nau'in

Tsayi (mm)

Nisa (mm)

Kauri (mm)

Nauyi (kg)

6 Kogo

650

270

490

600

8 Kogo

480

360

490

595

12 Kogo

610

360

490

755

16 Kogo

740

360

510

960

24 Kogo

790

500

510

1415

32 Kogo

800

580

510

1600

48 Kogo

1120

600

560

2640

64 Kofi

1380

600

610

3545

72 Kofi

1170

800

610

4010

96 Kofi

1230

960

610

5050

Bayanan da ke sama sun dogara ne akan preform na 16g tare da wuyan PCO.

bayanin samfurin01

48-Cavity Air-Sealed PET Preform Mold

1. Professionalwararru da fasaha gwaninta a preform mold cavities jere daga 1 zuwa 96 cavities.

2. Ƙimar da aka yi amfani da ita yana amfani da software na CAD don tsara siffar preform bisa ga kwalban don tabbatar da ingancin gyare-gyare na kwalban.

3. The thread bude abu na preform mold da aka shigo da nitrided karfe, kerarre bisa ga kasa da kasa matsayin, tare da high taurin, kowane zaren ne ventilated, kuma yana da dogon sabis rayuwa ba tare da nakasawa.

4. Preform mold core da rami an yi su da karfe mai jurewa, wanda yake dawwama.

5. A preform mold rungumi dabi'ar ci-gaba zafi mai gudu zane, sabõda haka, kowane rami za a iya da kansa zafin jiki sarrafa, mai tsanani, da kuma yawan zafin jiki ne uniform.

6. Yanke-free gate preform mold, ceton aiki da albarkatun kasa.

7. Ana sarrafa zazzabi na bututun mai zafi mai zafi daban.(Don magance matsalar fari da zanen waya a ƙasa yayin aikin samarwa).

8. Allura-bawul kai-kulle preform mold: kowane core, rami, m biyu kulle kai, daidaitacce eccentricity, rage eccentricity, tabbatar da samfurin concentricity, high daidaici.Tsarin yana da tsawon rayuwar sabis.

9. Taimako samfurin da zane-zane, samar da sabon haɓaka samfurin, sabis na tsayawa ɗaya don sarrafa gyare-gyaren allura!

bayanin samfurin03
bayanin samfurin04

48-Cavity Air-Sealed PET Preform Mold

1. Siffar Mold:

1. Mun ƙware a cikin samar da allura bawul molds, wanda ba ya bukatar manual yankan.

2. Yin amfani da ingantaccen tsarin mai gudu mai zafi yana tabbatar da cewa ƙimar AA na samfurin yana cikin ƙananan matakin.

3. M sanyaya ruwa tashar zane karfafa sanyaya sakamako na mold da yadda ya kamata shortens da allura gyare-gyaren sake zagayowar.

2. Zaɓin kayan aiki:

1. Babban sassa na mold an yi su ne daga shigo da kayan S136 (Sweden-Sabak).

2. Kayan tushe na mold yana ɗaukar kayan P20 da aka shigo da shi da kuma maganin electroplating, wanda ke inganta juriya na lalata da kuma tsawaita rayuwar sabis na mold.

3. Ana sarrafa yanayin zafi na sassan a cikin tanderun da aka shigo da shi daga Jamus, kuma taurin sassan yana da tabbacin kasancewa a HRC45 ° -48 °.

4. Nagartaccen kayan aiki:

Kamfanin ya gabatar da kayan aikin injin da yawa da aka shigo da su daga Amurka da Japan, irin su cibiyoyi, CNC lathes, EDM, da dai sauransu, don tabbatar da daidaiton mashin ɗin na sassan da kuma sanya sassan suna da kyakkyawar musanya., Kuskuren nauyi ya kasance ƙasa da 0.3g, ana iya samar da ƙwayoyin 2-5 a cikin minti ɗaya, kuma rayuwar sabis na iya kaiwa sau miliyan 2 mold.

bayanin samfurin11
bayanin samfurin10

24 Kogon Preform Mold

A sabon preform mold tsarin da kansa bincike da kuma ci gaba iya gaba daya kawar da mafi yawan disadvantages na baya kyawon tsayuwa, kuma zai iya cimma high-daidaici concentricity da kuma tsawon rai na mold, kuma za a iya gudanar da wani standardization na daban-daban sassa na mold da taro samar.Kayan aikin mu suna tabbatar da cewa bambancin kauri na bangon bututun bai wuce 0.05mm ba, kuma kuskuren nauyi bai wuce 0.3g ba.2-5 molds za a iya samar a cikin minti daya, da kuma sabis rayuwa iya isa 2 miliyan mold sau.Tsarin yana da matsakaicin cavities 96.

bayanin samfurin01
bayanin samfurin02

12 Cavity PET Preform Mold

1. Ana amfani da kogon ƙarfe na S136 da aka shigo da shi, core, da wuyan zare, kuma taurin maganin zafi zai iya kaiwa HRC 48-50;duk aikin da aka yi ana yi da zafi tare da taurin HRC 30-35.

2. Advanced mold zane fasaha: Kowane rami yana da kansa kulle kansa, ta yin amfani da high-daidaici Jafananci SYATEM.Don tabbatar da ƙarancin jiki da daidaiton samfurin.Kowane mutu yana da abubuwan da ake sakawa don sassa masu ɗorewa waɗanda ke musanya.Don haɓakawa da cimma ingantaccen samarwa, koyaushe muna tsara tsarin sanyaya mafi kyau, kuma muna iya daidaita injin sanyaya ga kowane nau'in ƙira.

3. Ci gaba da daidaitaccen bawul mai zafi mai zafi da mai kula da zafin jiki yana tabbatar da amincin samarwa da watsa haske mai girma da haske na samfurin.

4. Ana yin gyare-gyaren zamewa da jan karfe, jikin kwalban ya dace da ka'idodin aminci na abinci, kuma an tabbatar da rayuwar ƙirar ta zama fiye da sau miliyan 3.1.Siffofin ƙira:

1. Mun ƙware a cikin samar da allura bawul molds, wanda ba ya bukatar manual yankan.

2. Yin amfani da ingantaccen tsarin mai gudu mai zafi yana tabbatar da cewa ƙimar AA na samfurin yana cikin ƙananan matakin.

3. M sanyaya ruwa tashar zane karfafa sanyaya sakamako na mold da yadda ya kamata shortens da allura gyare-gyaren sake zagayowar.

bayanin samfurin02
bayanin samfurin03

  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana