Motar Grille Mold

Takaitaccen Bayani:

Sunwinmould ya ba da nau'ikan nau'in Grille mold, Motoci masu ƙarfi da ƙwanƙwasa mota.

Domin biyan buƙatun ƙera grille na waje, Sunwinmould ya samar da ƙirar allura ta musamman wacce ke ɗaukar hanyar dumama wutar lantarki.

1. Tsarin saman da ke tashi daga ciki: Sunwinmold zai iya ƙware tsarin kuma ya saita layin tashi akan saman da ba na waje da za a fitar dashi ba, don haka zai guje wa ɗan ƙaramin mataki akan saman mashin ɗin mota kuma ya guje wa batun yanke walƙiya.A ƙarshe, yana taimakawa wajen gane santsin farfajiyar mota.

2. Wurin Ƙofar allura: Daidaitaccen rabo na ƙofar allura zai iya rage bambancin matsa lamba na rami, kai tsaye yana rinjayar ingancin motar mota.

3. Wurin shan sashin allura: Bar sashin allurar a gefen rami ko gefen tsakiya?Dole ne mu yi la'akari da ma'auni mai ma'ana na tsarin kawar da ƙura.


Cikakken Bayani

Tags samfurin

Mota grille mold nuni

Sunwinmould ya samar da wani nau'in allura na musamman wanda ke ɗaukar hanyar dumama wutar lantarki, galibi yana nufin magance matsalolin cewa bayan an yi amfani da ƙirar allura mai nau'i-nau'i, ana samun alamun walda cikin sauƙi a saman samfur, da makamantansu.Tsarin allura na musamman wanda ke ɗaukar hanyar dumama wutar lantarki ya ƙunshi ƙirar gaba wanda aka shirya akan ƙayyadadden farantin injin ɗin allura, ƙirar baya da aka shirya akan farantin gyare-gyaren gyare-gyaren allura, injin dumama, da farantin sanyaya da aka yi amfani da shi. don sanyaya samfuran gyare-gyaren allura;an binne wani nau'in dumama wutar lantarki a cikin tushen dumama.Bisa ga specular allura mold rungumi dabi'ar lantarki dumama hanya, dumama da sanyaya suna da kansa da kuma daban-daban da za'ayi, sabõda haka, zafi canja wurin mold ne high, da kuma samar da inganci na specular allura mold an kara inganta;Bugu da ƙari, hanyar ruwa a cikin farantin sanyaya kawai yana shiga cikin sanyaya, don haka ɓangaren da aka haɗa baya buƙatar tsarawa, kuma tsarin ƙirar yana da sauƙi sosai.

bayanin samfurin01
bayanin samfurin02

Babban sigogi gyare-gyaren allura mai haske

Project: Babban bayanin siga

Zazzabi na Mold: Lokacin da aka ƙera ƙirar ƙira, zafin jiki yana kusan 80 ° C-130 ° C, kuma ana rage yawan zafin jiki zuwa 60-70 ° C lokacin da aka kiyaye matsa lamba.An goge saman kogon madubi.Dumamar tururin ruwa, bawul ɗin allura mai maki 3 a cikin manne.

Mold karfe: 1. CPM40/GEST80 (Greitz, Jamus) 2. CENA1 (Datong, Japan) 3. MIRRAX40 (Yaren mutanen Sweden ya lashe 100).

Ruwa mai sanyaya ruwa: tashar ruwa tana ɗaukar diamita na rami na 5-10mm, tazarar kusan 35mm, kuma saman samfurin shine 8-12mm.An tsara thermocouple na lantarki don sarrafa zafin jiki daidai, kuma an tsara bututun ruwan zafi mai zafi a gefen da ba ya aiki.

Mold rufi: A tsauri mold abun da ake sakawa bukatar da za a hollowed fitar da zayyana zafi rufi jirgin, da mold frame zane ruwa hanya, da jagora shafi zane gefen jagora shafi, da mold shaye 10mm sashe, da mold rabuwa surface sealing zane 10mm.

Nunin ƙirar grille na mota

bayanin samfurin01
bayanin samfurin03
bayanin samfurin02
bayanin samfurin04
samfurin-bayanin1

Kayan aiki

Bayanin samfur19
samfurin-bayanin20
bayanin samfurin21
bayanin samfurin22
Bayanin samfur23
bayanin samfur 5
bayanin samfurin6
samfurin-bayanin7
samfurin-bayanin8
bayanin samfurin9

Mold jigilar kaya zuwa abokin ciniki

Bayanin samfur29
samfurin-bayanin30
Bayanin samfur31

FAQ

Tambaya: Kuna yin gyare-gyare don sassa na motoci da yawa?
A: Ee, muna yin gyare-gyare ga sassa na mota da yawa, irin su gaban auto bumper mold, baya auto bumper mold da auto gasa mold, da dai sauransu

Tambaya: Kuna da injunan gyare-gyaren allura don samar da sassa?
A: Ee, muna da namu allurar bitar, don haka za mu iya samarwa da kuma tara bisa ga abokin ciniki bukatun.

Tambaya: Wane nau'i ne kuke yi?
A: Mun fi ƙera gyare-gyaren allura, amma kuma za mu iya kera gyare-gyaren matsawa (don kayan UF ko SMC) kuma mu mutu da ƙura.

Tambaya: Yaya tsawon lokacin da ake ɗauka don yin mold?
A: Dangane da girman samfurin da rikitarwa na sassan, ya ɗan bambanta.Gabaɗaya magana, ƙirar matsakaici na iya kammala T1 a cikin kwanaki 25-30.

Q: Za mu iya sanin da mold jadawalin ba tare da ziyartar ka factory?
A: Bisa ga kwangilar, za mu aika maka da mold samar da shirin.Yayin aikin samarwa, za mu sabunta muku rahotannin mako-mako da hotuna masu alaƙa.Saboda haka, za ka iya a fili fahimtar mold jadawalin.

Tambaya: Ta yaya kuke tabbatar da ingancin?
A: Za mu nada manajan aikin don bin diddigin abubuwan ƙirar ku, kuma zai ɗauki alhakin kowane tsari.Bugu da ƙari, muna da QC don kowane tsari, kuma za mu sami CMM da tsarin dubawa na kan layi don tabbatar da cewa duk abubuwan da aka gyara suna cikin haƙuri.

Q: Kuna goyan bayan OEM?
A: Ee, za mu iya samarwa ta hanyar zane-zane ko samfurori.


  • Na baya:
  • Na gaba:

  • Ku rubuta sakonku anan ku aiko mana